Re: HPSIM 7.3 installed, now what?
Hi Andrew, Thanks for the quick reply please see below answers to your questions - Subnet- yes for now i have added local subnet to discover - will add more after i have got HPsim working. i have...
View ArticleRe: HPSIM 7.3 installed, now what?
For starters do you have a reverse dns zone and can the SIM server resolve the discovered ip adresses? Can you ping the IP-adres you scan?Sim pings IP-adresses if it can ping them it will try a number...
View ArticleRe: Automatic Event Handling no e-mails
Okay, thanks. I have successfully changed over a few G9's to use AMS/iLO SNMP. I had to do "configure -> configure or repair agents" then pick the AMS option at the top. I also had to set up the...
View ArticleRe: Automatic Event Handling no e-mails
Hello Bob, On the second part, you are correct i would only set the SNMP part. This is enough. For the ilo part you can use powershell for mass config on the ILO, look here for more info...
View ArticleRe: Automatic Event Handling no e-mails
HI Andrew,what about the SNMP where we not getting alerts but can see issues when click on health status. do you recommend any seeting which can resolve this issue.
View ArticleRe: Automatic Event Handling no e-mails
Hello, I would open a new post and i can help you there. This was already discussed here so to keep things clear for each other let's start a new topic for you question oke ? I will go into further...
View ArticleHP SIM 7.5.0 and Host File
I haveupdated HPSIMto version7.5.0.Now I havenewserver,thesemust integrated with theHostFileintoHPSIM.I'm wearing anewserverinthehostfile.When i click "ok" I getthe following message from SIM:""There...
View ArticleRe: HP SIM 7.5.0 and Host File
Hello, The post is a little vage, could you post a screenshot of the error? You use a hostfile to add your servers?
View ArticleClik here to view.
Re: HP SIM 7.5.0 and Host File
Yes. I use a hostfile.After editing i would like to save. The messagethen:
View ArticleRe: Automatic Event Handling no e-mails
Hi Andrew. I'll check that out. I use Powershell off & on for remote admin, so i'm familiar with it. Over the last day or so I configured the AMS/iLO SNMP on 3 servers. From the configuration...
View ArticleRe: HP SIM 7.5.0 and Host File
I still have a 7.4 setup so i'm not sure if the file still needs to be a specific type of format, perhaps SIM can generate a sample file for comparison?
View ArticleRe: Automatic Event Handling no e-mails
If you only get an email for one server! Could you show the events for an other server that's receiving traps that you don't get emails for. And just to be sure did you change the auto rule clear the...
View ArticleRe: Automatic Event Handling no e-mails
Running Wireshark on the HP SIM server and monitoring for SMTP (tcp port 25) traffic helped me resolve this. My Wireshark showed successful communication between HP SIM and my Exchange SMTP mail server...
View ArticleRe: Automatic Event Handling no e-mails
One tip, Change the snmp community for the ams servers, use that community for the other tool and don't tell SIM this new community or better allow only the other tool access to the windows SNMP....
View ArticleRe: HP SIM 7.5.0 and Host File
Not sure if this could be related, but I had the same experience when attempting to import CA-signed certs in 7.5. After much time wasted, I found the root cause to be some missing Java jar files. To...
View ArticleRe: HP SIM 7.5.0 and Host File
Hello, Strange thing is that there is no hotfix available yet so i would think it's not a known issue. But then again most people do updates from previous versions. I' ll install the 7.5 on a clean...
View ArticleRe: Problem with HP SIM 7.3 to discover a P2000 g3 FC with WBEM
I have exactly the same experience. We are use HPSIM 7.4 on Windows Server 2012 R2. Our P2000 G3 storages are running with firmware TS2252R07. After logging on at one of the P2000 management...
View ArticleRe: Problem with HP SIM 7.3 to discover a P2000 g3 FC with WBEM
Hello, Does this device support WBEM? If so you would need credentials. SNMP traps create events in SIM datacollection collects hardware status, so getting an error will not change the health status,...
View ArticleRe: Automatic Event Handling no e-mails
Alright, thanks. Hey, do you see any point in scheduling "Discovery" jobs to run on a regular basis?I'd think once your servers have been discovered, there's no point it doing that repeatedly...well...
View Article