How to get a new HP DL160G9 discovered and monitored with HP SIM 7.4.0

I have HPSIM 7.4.0 on a server that monitors our HP hardware.

I have a 4x DL160G9 servers that I am looking to get SIM to discover and start monitoring.

All insight agents, SMH and anything else that the HP Service Pack has to offer has been installed. However, if I run a discovery on that server (which already has SNMP added and community strings) I can't get it to add into HP SIM and start monitoring.

Discovery logs: 

********* Additional results (listed for information only):

        * Starting identification process...
        * Checking for known running web servers...
        * Checking for SNMP protocol support on system...
Normal:   The system responded to an SNMP request; it supports SNMP Protocol 
          and has a valid read community string. 
        * Checking for SNMPv3 protocol support on system...
Minor:    Global SNMPv3 Identification is disabled.
        * Running HP ProLiant management agent identification...
Normal:   Identification can get the system information from the ProLiant 
          SNMP Foundation agents for servers. 
        * Running SNMP base cluster identification using common cluster 
          MIB... 
Normal:   This system does not have the common cluster MIBs support. 
        * Checking for WBEM protocol support on system...
Minor:    This system does not have any SMI-S CIMOMs installed. No storage 
          systems will be found on this system. 
Minor:    The Central Management System (CMS) cannot communicate with the 
          CIMOM locally installed on the managed system using the WBEM 
          protocol, Identification will try to identify Windows systems using 
          the WMI Mapper as proxy; for Linux and HP-UX systems, check 
          credentials by going to Options->Security->Credentials->System 
          Credentials. For Linux systems also check if the HP WBEM provider 
          is installed. 
        * Running WBEM rules based identification...
Minor:    Identification cannot get computer system hardware data from the 
          WBEM / WMI providers. 
        * Running Virtual Machine (VM) Host (non HP Integrity VM Host) 
          Identification... 
Normal:   The system is not a VM Host (non HP Integrity VM Host), or WBEM 
          credentials may not be specified so skipping VM Identification. 
        * Running Storage identification...
        * Did not detect the WBEM protocol support on this system. SMI 
          storage identification will be skipped. 
        * Storage identification completed.
        * Running HP NetServer identification...
Normal:   System supports the NetServer SNMP agent, adding system type.
        * Running HP-UX SNMP identification...
Normal:   System does not have the HP-UX SNMP agents installed.
        * Running OA Identifier which will discover systems in an enclosure 
          if the automatic enclosure discovery option for OA is enabled... 
Normal:   A non-embedded operating system is detected so skipping the OA 
          identification. 
        * Running XMLReply Identifier which will discover systems in a 
          rack/enclosure if the automatic discovery option for the container 
          node is enabled... 
Normal:   A non-embedded operating system is detected so skipping the 
          Management processor identification. 
        * Running iLO Identifier which will discover the server if the 
          automatic server discovery option for iLO is enabled... 
Normal:   A non-embedded operating system is detected so skipping the ILO 
          identification. 
        * Running p-Class Identifier...
Normal:   The system is not a p-Class so skipping p-Class identification.
        * Running IPMI protocol identification...
Normal:   Skipping IPMI discovery in favor of WBEM/SNMP discovery.
        * Running SSH Protocol identification...
Major:    Using SSH Protocol in discovery is disabled on the Central 
          Management Server (CMS). 
        * Running SSH Identification...
Major:    Using SSH Protocol in discovery is disabled on the Central 
          Management Server (CMS). 
        * Running WS-Man identification...
Normal:   A non-embedded operating system is detected so skipping the WS-MAN 
          identification. 
        * Running Monarch OA Identification...
Normal:   The system is not a monarch OA so skipping monarch OA 
          identification. 
        * Checking for System Management Homepage and other HP web agents...
Normal:   System Management Homepage (SMH) is installed or is responding on 
          the system(s). 
        * Running HP Serviceguard Identification...
Normal:   The system is not part of HP Serviceguard cluster.
        * Running SNMP System Type manager ...
Normal:   No matching SNMP System Type Manager rule for sysObjID was found.
        * Running SNMP subtypes identification...
        * No additional subtype(s) found from SNMP.
        * Resolving DNS names...
Normal:   The fully qualified domain name was successfully resolved for the 
          system. 
        * Checking if the Node is a Virtual Center... 
Normal:   Skipping MxVirtualCenter Identifier
        * Running Virtual Machine Management (VMM) Plug-in Identification...
Major:    The identification or discovery of this system has timed out, so 
          the task for this target has failed. If the managed system's CPU is 
          heavily utilized, then you may want to increase the timeout value 
          for identification for a single system. To do that, increase the 
          IdentificationTaskDefaultThreadTimeoutSec property in the 
          globalsettings.props file to 1800 (30 minutes) or more using the 
          mxglobalsettings CLI command. For more information, see the online 
          help.