Hello,
what are the credentials you used for connecting to the VCRM?
Re: VCA connecting VCRM
↧
↧
Re: VCA connecting VCRM
i was just using the local adminsitrator account.
Should i not be?
↧
Re: VCA connecting VCRM
Andrew,
Just to add to that, i've just tried logging as my domain admin account, but still unable to connect to the vcrm on the same server. Should i be putting the server name in full, or should localhost work?
Or should i not need the VCA on the same server as the VCRM and HP SIM?
Thanks
↧
Re: VCA connecting VCRM
You can use the SIM/VCRM and VCA all on the same server this should be no problem. I've also got that combination of packages on the SIM server and i works just fine. Could you post a screenshot of your settings and error you get ?
What version of VCRM ,VCA and SMH do you use ? This could be the problem if the VCA is older it can't connect to the SMH to in it's place connect to the VCRM. The SMH could be higher that the VCA then you can run into problems.
A combination that works is:
VCA : 7.3.4
SMH: 7.4.0
VCRM:7.4.1
There are more combinations that work but at least keep the VCA on the same or higher version than SMH.
↧
Re: VCA connecting VCRM
Andrew,
Where can i email you more details?
When i go to the HP Version Control Agent, this is what i see on the first screen, which shows my error plus it shows the versions you were after
Software Status
Overall Software Status: Status cannot be calculated because a Version Control Repository Manager has not been named. Click on change settings to specify a Version Control Repository Manager.
Installed Software
Name Installed Version
HP Version Control Repository Manager 7.3.0.0
HP Version Control Agent for Windows x64 7.3.4.0
HP System Management Homepage for Windows x64 7.3.3.1
lsi_sas.sys 1.34.3.82
Compaq System ROM 2013.07.30
↧
↧
Re: VCA connecting VCRM
Just to confirm, i'm currently using smi 7.3 on this server, but i'm looking to upgrade soon
Thanks
↧
Re: VCA connecting VCRM
Hello,
If you want to mail more info you can select the user you want send the message to in this forum. You can now send a private message from the right Side of the screen by clicking send private message.
If you want to mail more info you can select the user you want send the message to in this forum. You can now send a private message from the right Side of the screen by clicking send private message.
↧
Re: VCA connecting VCRM
I looked at the VCA version, this is the latest version so you should be able to connect to your VCRM. The error you post says the repository is not named so i could think of resolving but then the localhost should work. Could you post or email the error screen ?
↧
Re: HP SIM discovery blade information
Yes.
↧
↧
Re: VCA connecting VCRM
This is the error i get
↧
Event Severity Built In Alerts
Hi All,
I know you can change the event severity for some alerts by changing the MIB/Trap settings. My question is, can you change the event severity for generated by HP SIM? For example, if a data collection retries HP Insight Manager generates a minor event. I'd love to be able to change an event like this to informational. Ideas?
↧
Re: Event Severity Built In Alerts
Hello,
If your goal is not to receive alarms for these event you can use the same methode as i did. Create a custom event collection and make it to show all events except the internal events and use that collection to e-mail or forward to an other system.
If your goal is not to receive alarms for these event you can use the same methode as i did. Create a custom event collection and make it to show all events except the internal events and use that collection to e-mail or forward to an other system.
↧
Re: VCA connecting VCRM
You could try to use 127.0.0.1
↧
↧
Version Control Respository Manager - "The specified repository is invalid or not reachable"
I've been racking my brain on this one. I set up VCRM on a server a few months ago and was getting "The specified repository, [server], is invalid or not reachable". After a couple of months of research, I find a post that suggests doing these command lines:
C:\HP\hpsmh\bin>smhconfig.exe -Z ALL:!ADH:!EXPORT56:!EXPORT40:DES-CBC3-SHA:RC4-MD5:RC4-SHA:RC4+RSA:+HIGH:+MEDIUM:-SSLv2:+EXP:!LOW:!eNULL:!aNULL
C:\HP\hpsmh\bin>smhconfig.exe -r
At first, this didn't seem to work. Then one day it did and the server was working fine for a few months. Now I'm getting the same error message. The above fix does not work.
Tried installing on different servers, no luck. Checked firewall, no change. Tried IP and fqdn. Made sure have latest SMH and VCRM.
Any ideas?
Thanks
P.S. This thread has been moved from ProLiant Servers (ML,DL,SL) to ITRC HP Systems Insight Manager Forum. - Hp Forum moderator
↧
Re: Version Control Respository Manager - "The specified repository is invalid or not reachable
Hello,
You should install the latest VCA to connect to the VCRM. This because of the encription problems between the older VCA and the between SMH. VCA first connect to the VCRM trough the SMH of the server it wants to get the baseline from.
You should install the latest VCA to connect to the VCRM. This because of the encription problems between the older VCA and the between SMH. VCA first connect to the VCRM trough the SMH of the server it wants to get the baseline from.
↧
Re: Changing SIM Service Account Password
Thank you very much for this solution. After changing the service account password the connection was permanently refused by the SQL server...
I was a bit suprised that a special tool is needed to change SIM account but your solution worked excellent.
↧
Re: VCA connecting VCRM
typing in that 127 address just shows teh same error.
i also tried FQDN and server name, but no good
↧
↧
Re: VCA connecting VCRM
Use the Using Username and password option not the certificate option in the credentials on the VCA settings
↧
HP Insight Manager
When I try and install HP Insight Manager 7.4 on a Domain Controller running server 2012, I keep getting the following error. All pre-requisites are installed. Can anyone help in getting it installed or am I using the wrong product.
HP Systems Insight Manager Installer detected an unsupported operating system. For installation to proceed further, you must have a supported operating system. Refer to the HP Insight Management Support Matrix to review list of operating system requirements.
Thanks
Bruce
P.S. This thread has been moved from General to ITRC HP Systems Insight Manager Forum. - Hp Forum moderator
↧
Re: HP Insight Manager
Hi Bruce
The error that you are seeing is because you cannot install Systems Insight Manager on a Domain Controller. As part of the installation you have to install SQL Express and Microsoft recommend against this.
https://support.microsoft.com/en-us/kb/2032911
If you have another server you can run it on, then you will be fine.
Leonard...
↧
More Pages to Explore .....
