Re: HPE System Management Homepage 7.6.0
Hello,It seems to be an IE issue as anywhere IE11 is installed it works fine... Unfortunately we have still Windows Server 8 which allow only IE9 ...We have two options:1. use a remote station with IE...
View ArticleRe: HPE System Management Homepage 7.6.0
Hi there,I have the same issue with HP SMH 7.6.0 and Windows Servers 2008 and 2008 R2 where IE8 is installed by default. HP SMH 7.6.0 opens fine in Chrome on those servers but fails to open in IE8....
View ArticleRe: HPE System Management Homepage 7.6.0
Yes same confusion here!!!HP SMH 7.6.0 works fine with IE 10 and above.HP SMH 7.5.2 works only with IE 9 and below.Windows 2008 support only IE 9Windows 2008 R2 Support IE11 in x64 Only ... see this...
View ArticleRe: HPE System Management Homepage 7.6.0
Have you tried enabling TLS 1.2? It seems to be the issue with 7.6.0 version as it uses TLS 1.2 and it wasn't selected in my IE8. Now I've checked the box and it works fine.Max
View Articlehow to monitor HP Servers behind NAT device using HPSIM?
Hi all,I'm using net-snmp agents with snmp-proxy feature for forwarding OID inside a NAT device to a public HPSIM server. But HPSIM not support to inventory all devices behind the NAT device. Is there...
View ArticleRe: how to monitor HP Servers behind NAT device using HPSIM?
Hello, No not that i'm aware of, you could install a VM SIM setup in the NAT subnet and let it forward event to the other SIm server. It depends on the number of servers in the NAT range if would want...
View ArticleVCRM now untrusted after updating SMH
My SIM server is virtual, but I believe requires SMH installed on it regardless (probably because VCRM uses it). I updated SMH to the latest version (from HPE October Service Pack for Proliant) and...
View ArticleRe: VCRM now untrusted after updating SMH
Try deleting all certs from SMH.Use SIM > Configure> "Configure or repair agent" to redeploy the SSO cert to itself and try again
View ArticleRe: VCRM now untrusted after updating SMH
Thanks for the reply. I tried that earlier and it did not work. I ended up uninstalling the new SMH and reinstalling the old version. That seemed to have no affect so then I reinstalled the latest...
View ArticleRe: Need help with SQL query
If you can figure out the table/column that holds the MxGUID, you can do something like this:...R_Inventory.numberOfCPU,'https://yoursimserver:50000/mxportal/DevicePage/devicepage.jsp?nodeId='+...
View ArticleOnly uuid appearing in HPSIM
Hi Guys,I am a newbie in managing HPSIM server so would appreciate your help on this.We have HP SIM 7.5 in our env., I noticed lots of server records only as uuid in the HPSIM.So basically server...
View ArticleRe: Only uuid appearing in HPSIM
Are you discovering gen6 and below with ilo first?I usually see UUID for servers when you discover ilo2 first.Make sure the proper agents are installed on the host and is configured for either...
View ArticleConfiguring HP System Inisght Manager on HP UX using CLI commands
Hello,I run into problems when trying to configure HP SIM on an rx28000 i4 server running HPUX 11.31 without using the First time Wizard, just executing HP SIM CLI commands instead. Communication to...
View ArticleHP SIM - Move to new domain
Hello,I am an new here and am looking for some help on how to go about moving an existing SIM to a new domain. Our company was purchased and are in the process of moving our environment over to their...
View ArticleRe: WBEM 9.3.0.0 installation issues
My problem Solved installing only the ilo Channel Interface Driver and Management Controller Driver!! Thanks dbentz
View ArticleRe: HPE System Management Homepage 7.6.0
Enableing TLS 1.2 in IE 8 worked for me. Thanks for the help- Art
View ArticleRe: HPE System Management Homepage 7.6.0
HelloI finally was using an IE 10 or IE 11 on a workstation to get the limk working as for any IE versions below I was still getting failure Thanks,DOm
View ArticleSysMgmtWeb Login in browser fails
Login to System Management Homepage via web browser fails. Error on web page is, "ERROR: Username and password do not match". Smh.log shows, "WARNING LOG (severity=1) Mon Nov 14 14:53:53...
View ArticleRe: Monitoring servers with SIM using ilo only
this is actually working with HPSIM 7.5 now. We have ILOs mpnitored through HPSIM and it is reporting the events from the ILOs. We use SNMP configuration for communication. Thank you,Vishal Ch.
View ArticleVersion Control Repository Manager, Error code: 2147500037
Hi, Every night the automatic update fails with a lot of SPPs and other updates mentioned in the error log:Entry DetailsSeverity ErrorDate / Time 2016-11-15 00:18:48Message The automatic repository...
View Article