How to disable an FC HBA alert on ProLiant DL380 G7

I Have HP Systems Insight Manager 7.1 Update 1 installed on a Windows 7 x64 system. I have discovered several VMWare ESXi 5.5 hosts running on HP ProLiant DL380 G7 servers. All of these servers were installed using the HP custom .ISO for VMWare ESXi 5.5, so they are running the HP agents.

I have WBEM credentials configured and it is correctly reading the hardware with the exception that it is throwing the following warning/error on all systems under the Health Status --> WBEM header on teh System Status page:

! FC HBA

If I click on the FC HBA link it generates the following detailed information:

FC HBA Ports
Port Status Port Name Controller ID Port Type Port Type Description Current State
Stopped Fibre Channel Port 1 QLogic QLE8152 Other Fabric There is a minor problem that is causing limited interference.
Stopped Fibre Channel Port 2 QLogic QLE8152 Other Fabric There is a minor problem that is causing limited interference.

FC Port Statistics
Controller ID Bytes Transmitted Bytes Received Pkts Transmitted Pkts Received CRC Errors Link Failures
QLogic QLE8152 0 Bytes 0 Bytes 35741347 24021341 1 0
QLogic QLE8152 0 Bytes 0 Bytes 35741562 24021616 1 0

I can see entries for the following under Storage Adapters in vSphere:

ISP81xx-based 10 GbE FCoE to PCI Express CNA
vmhba1
vmhba2

I assume this is the hardware causing the FC HBA events in HP SIM. I am looking for a way to stop getting these events or ignore them.

Possible solutions:
1. Filter/ignore the FC HBA within HP SIM (it is not an option under "WBEM Health Inclusion Status"
2. Disable the hardware on the VMWare ESXi 5.5 server so that it no longer registers with VMWare or responds to HP SIM WBEM query.

Anyone have steps to accomplish either of these or an alternate solution to accomplish stopping the FC HBA events?