I have reconfigured and apply policy again:
It reacts different now, I think policy worked this time.
Still some minor error ;)
Discover output:
********* Significant issues and overall target discovery/identification
status:
Minor: The discovered blade is not in an enclosure. For c-Class
enclosures, verify that the supported OA firmware version is
installed and verify that the OA has been discovered in HP SIM. For
p-Class enclosures, verify that the iLO firmware and the HP Insight
Management Agents on the server are installed and verify that the
iLO has been discovered in HP SIM.
Normal: The system has valid hardware data (model, serial number, and
unique identifier) and has been identified properly for SIM to
manage.
********* Additional results (listed for information only):
* Starting identification process...
* Checking for known running web servers...
* Checking for SNMP protocol support on system...
Normal: The system responded to an SNMP request; it supports SNMP Protocol
and has a valid read community string.
* Running HP ProLiant management agent identification...
Normal: Identification can get the system information from the ProLiant
SNMP Foundation agents for servers.
* Running SNMP base cluster identification using common cluster
MIB...
Normal: This system does not have the common cluster MIBs support.
* Checking for WBEM protocol support on system...
Minor: This system does not have any SMI-S CIMOMs installed. No storage
systems will be found on this system.
Minor: The Central Management System (CMS) cannot communicate with the
CIMOM locally installed on the managed system using the WBEM
protocol, Identification will try to identify Windows systems using
the WMI Mapper as proxy; for Linux and HP-UX systems, check
credentials by going to Options->Security->Credentials->System
Credentials. For Linux systems also check if the HP WBEM provider
is installed.
* Running WBEM rules based identification...
Normal: Got the system information from the WBEM / WMI providers and it has
a valid WBEM credential.
* Running Virtual Machine (VM) Host (non HP Integrity VM Host)
Identification...
Normal: The system is not a VM Host (non HP Integrity VM Host), or WBEM
credentials may not be specified so skipping VM Identification.
* Running Storage identification...
* Storage identification completed.
* Running HP NetServer identification...
Normal: System supports the NetServer SNMP agent, adding system type.
* Running HP-UX SNMP identification...
Normal: System does not have the HP-UX SNMP agents installed.
* Running OA Identifier which will discover systems in an enclosure
if the automatic enclosure discovery option for OA is enabled...
Normal: A non-embedded operating system is detected so skipping the OA
identification.
* Running XMLReply Identifier which will discover systems in a
rack/enclosure if the automatic discovery option for the container
node is enabled...
Normal: A non-embedded operating system is detected so skipping the
Management processor identification.
* Running iLO Identifier which will discover the server if the
automatic server discovery option for iLO is enabled...
Normal: A non-embedded operating system is detected so skipping the ILO
identification.
* Running p-Class Identifier...
Normal: The system is not a p-Class so skipping p-Class identification.
* Running IPMI protocol identification...
Normal: Skipping IPMI discovery in favor of WBEM/SNMP discovery.
* Running SSH Protocol identification...
Minor: The system(s) do not have Secure Shell (SSH) installed or it is not
running on the managed system(s).
* Running SSH Identification...
Normal: SSH Protocol is not enabled so skipping SSH Identification.
* Running WS-Man identification...
Normal: A non-embedded operating system is detected so skipping the WS-MAN
identification.
* Running Monarch OA Identification...
Normal: The system is not a monarch OA so skipping monarch OA
identification.
* Checking for System Management Homepage and other HP web agents...
Normal: System Management Homepage (SMH) is installed or is responding on
the system(s).
* Running HP Serviceguard Identification...
Normal: The system is not part of HP Serviceguard cluster.
* Running SNMP System Type manager ...
Normal: No matching SNMP System Type Manager rule for sysObjID was found.
* Running SNMP subtypes identification...
* No additional subtype(s) found from SNMP.
* Resolving DNS names...
Normal: The fully qualified domain name was successfully resolved for the
system.
* Checking if the Node is a Virtual Center...
Normal: Node is not a Virtual Center Node
* Running Virtual Machine Management (VMM) Plug-in Identification...
* Building system relationships...
Normal: The trust between the CMS and the managed system is established.
* Running system Manage Communication diagnosis...
* System identification finished on system.
It reacts different now, I think policy worked this time.
Still some minor error ;)
Discover output:
********* Significant issues and overall target discovery/identification
status:
Minor: The discovered blade is not in an enclosure. For c-Class
enclosures, verify that the supported OA firmware version is
installed and verify that the OA has been discovered in HP SIM. For
p-Class enclosures, verify that the iLO firmware and the HP Insight
Management Agents on the server are installed and verify that the
iLO has been discovered in HP SIM.
Normal: The system has valid hardware data (model, serial number, and
unique identifier) and has been identified properly for SIM to
manage.
********* Additional results (listed for information only):
* Starting identification process...
* Checking for known running web servers...
* Checking for SNMP protocol support on system...
Normal: The system responded to an SNMP request; it supports SNMP Protocol
and has a valid read community string.
* Running HP ProLiant management agent identification...
Normal: Identification can get the system information from the ProLiant
SNMP Foundation agents for servers.
* Running SNMP base cluster identification using common cluster
MIB...
Normal: This system does not have the common cluster MIBs support.
* Checking for WBEM protocol support on system...
Minor: This system does not have any SMI-S CIMOMs installed. No storage
systems will be found on this system.
Minor: The Central Management System (CMS) cannot communicate with the
CIMOM locally installed on the managed system using the WBEM
protocol, Identification will try to identify Windows systems using
the WMI Mapper as proxy; for Linux and HP-UX systems, check
credentials by going to Options->Security->Credentials->System
Credentials. For Linux systems also check if the HP WBEM provider
is installed.
* Running WBEM rules based identification...
Normal: Got the system information from the WBEM / WMI providers and it has
a valid WBEM credential.
* Running Virtual Machine (VM) Host (non HP Integrity VM Host)
Identification...
Normal: The system is not a VM Host (non HP Integrity VM Host), or WBEM
credentials may not be specified so skipping VM Identification.
* Running Storage identification...
* Storage identification completed.
* Running HP NetServer identification...
Normal: System supports the NetServer SNMP agent, adding system type.
* Running HP-UX SNMP identification...
Normal: System does not have the HP-UX SNMP agents installed.
* Running OA Identifier which will discover systems in an enclosure
if the automatic enclosure discovery option for OA is enabled...
Normal: A non-embedded operating system is detected so skipping the OA
identification.
* Running XMLReply Identifier which will discover systems in a
rack/enclosure if the automatic discovery option for the container
node is enabled...
Normal: A non-embedded operating system is detected so skipping the
Management processor identification.
* Running iLO Identifier which will discover the server if the
automatic server discovery option for iLO is enabled...
Normal: A non-embedded operating system is detected so skipping the ILO
identification.
* Running p-Class Identifier...
Normal: The system is not a p-Class so skipping p-Class identification.
* Running IPMI protocol identification...
Normal: Skipping IPMI discovery in favor of WBEM/SNMP discovery.
* Running SSH Protocol identification...
Minor: The system(s) do not have Secure Shell (SSH) installed or it is not
running on the managed system(s).
* Running SSH Identification...
Normal: SSH Protocol is not enabled so skipping SSH Identification.
* Running WS-Man identification...
Normal: A non-embedded operating system is detected so skipping the WS-MAN
identification.
* Running Monarch OA Identification...
Normal: The system is not a monarch OA so skipping monarch OA
identification.
* Checking for System Management Homepage and other HP web agents...
Normal: System Management Homepage (SMH) is installed or is responding on
the system(s).
* Running HP Serviceguard Identification...
Normal: The system is not part of HP Serviceguard cluster.
* Running SNMP System Type manager ...
Normal: No matching SNMP System Type Manager rule for sysObjID was found.
* Running SNMP subtypes identification...
* No additional subtype(s) found from SNMP.
* Resolving DNS names...
Normal: The fully qualified domain name was successfully resolved for the
system.
* Checking if the Node is a Virtual Center...
Normal: Node is not a Virtual Center Node
* Running Virtual Machine Management (VMM) Plug-in Identification...
* Building system relationships...
Normal: The trust between the CMS and the managed system is established.
* Running system Manage Communication diagnosis...
* System identification finished on system.