Hi
System management homepage uses one of 2 X protocols to populate all the information in SMH.
So you need to either use SNMP or WBEM
If you select SNMP from SMH settings then you need to install the below management agents
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_8deb11de54ea4d1fb702029745
If you select WBEM as a protocol from SMH settings then you need to install using below link
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_606fc6aeafdc4e5aa0bef249a7
+++++++++++++++++++++++++++++
If you select SNMP then you need to configure settings under snmp
How to congifure
From Windows select > snmp services >Right click SNMP services > Select properties
Now on the top select tabs "Security" > configure "public" as read community and "private" as write community.
Similary select the tab "traps" > configure "public" as read community and "private" as write community.
Now come back to SMH and select SNMP protocol under settings evrything will be populated in SMH
If you are planning to select WBEM you dont have to configure any settings
just install the package and all will be configured.