The machines that I monitor are primarily Linux based machines. I installed the following RPMs in this order:
hp-health
hpsmh
hpdiags
hp-snmp-agents
hp-smh-templates
Once you've got those installed, I would recommend setting up and SNMP pass through using your iLO device from the Administation section, then discover the iLO device, then the machine. They should automatically associate with one another. All of the data you're looking to gather is provided to me via SNMP on these devices.
There's more than likely an easier way, but this is what's worked for me in the past. I hope this helps you get started.
hp-health
hpsmh
hpdiags
hp-snmp-agents
hp-smh-templates
Once you've got those installed, I would recommend setting up and SNMP pass through using your iLO device from the Administation section, then discover the iLO device, then the machine. They should automatically associate with one another. All of the data you're looking to gather is provided to me via SNMP on these devices.
There's more than likely an easier way, but this is what's worked for me in the past. I hope this helps you get started.