Hi Andrew , I am getting error , but the sever is not getting added to SIM , Plase help
Status: Some Minor Errors
Start time: 6/20/16 1:55 AM
Task name: UCC servers End time: 6/20/16 1:57 AM
Tool: System Automatic Discovery Duration: 1 min, 14 sec
Owner: abbvienet\a-kumargx20 Target: 15.91.67.221
Run by: abbvienet\a-kumargx20
Command: N/A
--------------------------------------------------------------------------------
System Name: 15.91.67.221
Status: Completed with minor errors
Exit code: N/A
Stdout:
********* Significant issues and overall target discovery/identification
status:
Minor: The name of the system could not be resolved to a fully qualified
domain name. For a Windows CMS, make sure that the domain name of
the managed system is included in the DNS suffixes in the Windows
Advanced TCP/IP Settings page.
Minor: The reverse DNS lookup using the IP address: 15.91.67.221 failed.
It might be that the nslookup timed out or DNS server cannot find
this address, or that the domain does not exist.
Minor: Verify that your name resolution service or the host file
configuration is configured properly so that your system's hostname
can be resolved to the fully qualified domain name.
Minor: The discovered blade is not in an enclosure. For c-Class
enclosures, verify that the supported OA firmware version is
installed and verify that the OA has been discovered in HP SIM. For
p-Class enclosures, verify that the iLO firmware and the HP Insight
Management Agents on the server are installed and verify that the
iLO has been discovered in HP SIM.
Normal: The system has valid hardware data (model, serial number, and
unique identifier) and has been identified properly for SIM to
manage.
********* Additional results (listed for information only):
* Starting identification process...
* Checking for known running web servers...
* Checking for SNMP protocol support on system...
Normal: The system responded to an SNMP request; it supports SNMP Protocol
and has a valid read community string.
* Checking for SNMPv3 protocol support on system...
Normal: The system did not respond to SNMPv3. Verify security settings and
v3 credentials in Options->Security->Credentials->System
Credentials
* Running HP ProLiant management agent identification...
* Running SNMP base cluster identification using common cluster
MIB...
Normal: This system does not have the common cluster MIBs support.
* Checking for WBEM protocol support on system...
Minor: This system does not have any SMI-S CIMOMs installed. No storage
systems will be found on this system.
Minor: The Central Management System (CMS) cannot communicate with the
CIMOM locally installed on the managed system using the WBEM
protocol, Identification will try to identify Windows systems using
the WMI Mapper as proxy; for Linux and HP-UX systems, check
credentials by going to Options->Security->Credentials->System
Credentials. For Linux systems also check if the HP WBEM provider
is installed.
* Running WBEM rules based identification...
Minor: Identification cannot get computer system hardware data from the
WBEM / WMI providers.
* Running Virtual Machine (VM) Host (non HP Integrity VM Host)
Identification...
Normal: The system is not a VM Host (non HP Integrity VM Host), or WBEM
credentials may not be specified so skipping VM Identification.
* Running Storage identification...
* Did not detect the WBEM protocol support on this system. SMI
storage identification will be skipped.
* Storage identification completed.
* Running HP NetServer identification...
Normal: System supports the NetServer SNMP agent, adding system type.
* Running HP-UX SNMP identification...
Normal: System does not have the HP-UX SNMP agents installed.
* Running OA Identifier which will discover systems in an enclosure
if the automatic enclosure discovery option for OA is enabled...
Normal: A non-embedded operating system is detected so skipping the OA
identification.
* Running XMLReply Identifier which will discover systems in a
rack/enclosure if the automatic discovery option for the container
node is enabled...
Normal: A non-embedded operating system is detected so skipping the
Management processor identification.
* Running iLO Identifier which will discover the server if the
automatic server discovery option for iLO is enabled...
Normal: A non-embedded operating system is detected so skipping the ILO
identification.
* Running p-Class Identifier...
Normal: The system is not a p-Class so skipping p-Class identification.
* Running IPMI protocol identification...
Minor: Running an ipmiutil command failed and the IPMI protocol is not
supported.
* Running SSH Protocol identification...
Minor: The system(s) do not have Secure Shell (SSH) installed or it is not
running on the managed system(s).
* Running SSH Identification...
Normal: SSH Protocol is not enabled so skipping SSH Identification.
* Running WS-Man identification...
Normal: A non-embedded operating system is detected so skipping the WS-MAN
identification.
* Running Monarch OA Identification...
Normal: The system is not a monarch OA so skipping monarch OA
identification.
* Checking for System Management Homepage and other HP web agents...
Normal: The system is not a server, storage or desktop. Skipping the check
for System Management Homepage.
* Running HP Serviceguard Identification...
* Running SNMP System Type manager ...
Normal: No matching SNMP System Type Manager rule for sysObjID was found.
* Running SNMP subtypes identification...
* No additional subtype(s) found from SNMP.
* Resolving DNS names...
* Checking if the Node is a Virtual Center...
Normal: Node is not a Virtual Center Node
* Running Virtual Machine Management (VMM) Plug-in Identification...
* Building system relationships...
Major: In order to access Secure Sockets Layer (SSL) based tools such as
System Management Homepage and Version Control Repository Manager
on remote systems without performing an additional sign-in, you
need to establish trust between the Central Management Server (CMS)
and the managed system(s).
* Running system Manage Communication diagnosis...
* System identification finished on system.
Stderr: None