Could be the IML log, check the log in the SMH and clear any uncleared events. Then either do a status poll by hand or wait for a minute or 15 for the status to update. Also check if the SMH has WBEM and or SNMP as a source.
Your server is a GEN8 server so perhaps you use the ILO and AMS agent. Please let me know which protocol you use. Oops checked the screenshot and you seem to be using WBRM and SNMP. My tip would be to uninstall the SNMP agents and WBEM and install the AMS agent, enable SNMP on the ILO. Now rerun the identify ILO and see what happens.